Auto Page RF-302 Manual de usuario descargar pdf (Pagina 3)

TR302-304 A / B -TDxxx - TK301 / 302 - WKT3xxR / xxF - WHT390 - TU4xx

3 6T 7871a

The TR351 coupler allows information to be exchanged between the RF emitters and the KNX TP bus products.

The application softwares for the input products are used to configure the product inputs individually.

The main functions are the flollowing:

■

Sending commands

The inputs allow commands for lighting, rolling shutters and blinds, heating settings and scenes to be transmitted.

Sending commands:

• Lighting control:

- Toggle switch, ON, OFF, ON / OFF, Timer, Priority

- 1 button or 2 button dimmer.

• Shutters / blinds control:

- Up, Down, Stop, Blind slat angle, Priority, Wind alarm, Rain alarm,

- 1 button or 2 button control.

• Set point selection (Thermostat)

- Comfort, Night set-point, Comfort / Night set-point, Frost protection, Priority.

■

Scene

The Scene function sends group controls to different kinds of outputs to create ambiences or scenarios.

Example of scene 1: Leaving the house (centralised lighting control OFF, shutters on south side 3 / 4 closed, the other shutters

open, heating switched over to Reduced mode).

■

Priority

The Priority function allows an input to be forced to a defined status.

The forcing action depends on the type of application controlled: Lighting, Shutters / blinds, Heating.

■

Alarms

The Alarm 1 and Alarm 2 functions allow alarms coming from automatic controls to be periodically emitted (anemometer, rain

detector, light sensitive switch, etc.). Alarm 1 has a higher priority than Alarm 2.

1. Function Description

1 2 3 4 5 6 7 8

Sin comentarios

Auto Page RF-302 Manual de usuario Pagina 3