Auto Page MA-200 Manual de instrucciones descargar pdf (Pagina 9)

2.2 Tab PARA, button SEND, GET, GO, STOP

PARA:

Pressing the PARA tab opens a window for setting the sensor

parameters.

ATTENTION!

A change of the parameter function groups only becomes

effective at the sensor after actuation of the SEND button

in the MEM function field!

SEND [F9]:

When the SEND button is clicked (or shortcut key button F9 is

pressed), all the currently set parameters are transferred

between PC and sensor. The target of the respective

parameter transfer is determined by the selected button (RAM,

EEPROM, or FILE).

GET [F10]:

The currently set values can be interrogated from the sensor

by clicking on the GET button (or with shortcut key button F10).

The source of data exchange is determined by the selected

button (RAM, EEPROM, or FILE).

RAM:

After a click on the SEND button the current parameters are

written into the RAM memory of the sensor, or they are read

from the RAM by clicking on the GET button, i.e. these

parameters are lost when the voltage at the sensor is switched

off.

EEPROM:

After a click on the SEND button the current parameters are written into the non-volatile memory of the EEPROM

in the sensor, or they are read from the EEPROM by clicking on the GET button, i.e. the parameters in the

internal EEPROM are stored when the voltage at the sensor is switched off.

FILE:

After pressing SEND, the current parameters can be written to a selectable file on the hard disk. With GET

parameters can be read from such a file. When the SEND or GET button is pressed, a dialog box opens for

selecting the desired file.

GO [F11]:

A click on this button (or with shortcut key button F11) starts data transfer from the sensor to the PC through the

serial RS232 interface.

SOURCE is used to select which signals should be shown in the displays and graphs.

STOP [F12]:

A click on this button (or with shortcut key button F12) stops data transfer from the sensor to the PC through the

serial RS232 interface.

colorCONTROL C4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Sin comentarios

Auto Page MA-200 Manual de instrucciones Pagina 9