Auto Page MA-200 Manual de instrucciones descargar pdf (Pagina 19)

Chapter 2 Microscopy

Set the microscope for the bright-field microscopy under the episcopic illumination.

If the current unit is the one shown in the column at the right edge under “Other items required” in Table 2.1,

pull out each item from the optical path.

1 Push in the optical path changeover lever for the

eyepiece tube and select 100% for the binocular

eyepiece. (See 3.4.1.)

2 Push in the eyepiece tube/back port changeover

lever to select 100% for the eyepiece tube. (See

3.4.1.)

3 Push in the BD field changeover lever to select the

“BF (bright-field)” position. (See 3.3.)

4 Turn the revolving nosepiece to place the 10X

objective into the optical path. (See 3.9.2)

The nosepiece addresses (1 to 7) on the

front-display light up to indicate the position of the

revolving nosepiece. (See 3.9.3.)

5 Place the NCB11 filter in the filter turret into the

optical path and compensate color temperature.

(See 3.10)

6 Adjust the brightness roughly with the brightness

control dial and the desired ND filter in the filter

turret. (See 3.2.1 and 3.10.)

7 Turn the field diaphragm dial and the aperture

diaphragm dial counter-clockwise to the limit to

fully open the field diaphragm and the aperture

diaphragm for the episcopic illumination. (See 3.11

and 3.12.)

Place the sample onto the stage and adjust the focus and the brightness.

1 Use the sample holder according to the selected

sample. Place the sample onto the stage and

move the stage using the stage movement knob

for the X/Y direction so that the observation

position comes to the center of the view-field. (See

3.8.)

2 Turn the coarse/fine focus knobs and focus on the

target. (See 3.7.)

3 Turn the brightness control dial to adjust the

brightness of the episcopic illumination. (See

3.2.1.)

Adjust the diopter and the interpupillary distance.

1 Adjust the interpupillary distance. (See 3.5.)

2 Adjust the diopter. (See 3.6.)

2-1

2-5, 6

2-4

2-6

2-4

2-3

2-7

3-2

3-3

3-1

2-2

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 106 107

Comentarios a estos manuales

Sin comentarios

Auto Page MA-200 Manual de instrucciones Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Auto Page MA-200