Auto Page MA-200 Manual de instrucciones descargar pdf (Pagina 83)

Chapter 4 Assembly

4.7 Objectives

1 Remove the sample holder from the stage.

2 Screw the objectives into the socket of the

revolving nosepiece securely through the stage

hole.

Attach the objectives so that the magnification

increases when the revolving nosepieces are

turned clockwise as viewed from above.

■ LU nosepiece adapter M32-25

To use the EPI objectives with small screw diameter while the quintuple revolving nosepiece is in use, screw

the LU nosepiece adapter M32-25 into the revolving nosepiece in advance.

4.8 Eyepiece Tube

Fully loosen the eyepiece tube clamp screw on the

upper-left with the supplied hexagonal screwdriver.

Insert the dovetail on the eyepiece tube into the

circular groove on the attaching part to secure the

eyepiece tube with clamp screw.

Hold the eyepiece tube by hand when loosening

the clamp screw to prevent a sudden

disconnection and falling.

4.9 Eyepieces

Attach eyepieces of the same magnification and the

same view-field number.

There are positioning protrusions on the binocular

part sleeve of the eyepiece tube. Align the notches of

the eyepiece with the protrusions on the sleeve and

slide the eyepiece into the eyepiece socket.

Eyepiece tube

clamp screw

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 106 107

Sin comentarios

Auto Page MA-200 Manual de instrucciones Pagina 83