Auto Page MA-200 Manual de instrucciones descargar pdf (Pagina 40)

Chapter 3 Operation Details

3.8.2 Changing the Observation Position

The rectangular stage is equipped with the knob to

move the stage in all four directions.

The upper knob is used for Y direction (back and

forth), and the lower knob for X direction (left and

right).

The stage knob has a universal joint that allows you

to move the stage knob direction being tilted at 28

degrees. This offers easy operation and user

convenience for switching between the focus knob

and the stage knob.

The stage is equipped with the graduations that move

50 mm (max.) to X or Y direction.

Figure 3.8-2 Changing the observation position

• A cross roller guide is provided to move the

stage in the X/Y direction. The Y direction

movement rack is located at the bottom of the

stage. Do not touch the rack during your

operation, as you may get injured.

• If you move the stage plate directly by hands,

the stage will be damaged. Make sure to use

these stage knobs to move the stage.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 106 107

Sin comentarios

Auto Page MA-200 Manual de instrucciones Pagina 40