Auto Page MA-200 Manual de instrucciones descargar pdf (Pagina 39)

Chapter 3 Operation Details

3.8 Placing the Sample and Operating the Stage

3.8.1 Placing the sample

Figure 3.8-1 Placing the sample

Normally, a sample can be placed on the stage with

the sample holder. It can be also placed directly on

the stage without the sample holder. In either case,

be sure that the observation position comes to the

center of the view-field.

■ Sample holder

To use the sample holder, place it onto the stage.

The MA2-SR rectangular stage is supplied with the sample holder (outer diameter: φ108 mm, thickness: 2 mm,

teardrop-shaped aperture: φ22 mm). This sample holder is also supplied with the sample clip to hold the

sample set on the stage. Use the clip to prevent the sample from tipping over or being moved.

The sample holder is supplied with a rotation knob. If you turn the ring holding the rotation knob, you can turn

the sample with the observation position unmoved.

Various options are available for the sample holder as shown below. Select an appropriate option according

to the size or observation method of the sample used.

Item Model Remarks

Sample holder Standard Holder

(attached to stage)

Outer diameter φ108 mm; thickness: 2 mm; teardrop-shaped

aperture: φ22 mm; supplied with the rotation knob and a sample

clip

MA-SRSH 40 φ40 mm, supplied with the rotation knob and a sample clip

MA-SRSH 10 φ10 mm, supplied with the rotation knob and a sample clip

MA-SRSH 25-40 φ25×40 mm, supplied with the rotation knob and a sample clip

MA2-SRSH Holder set (φ23, 30, 36 mm) supplied with the rotation knob and

a sample clip

MA-SRSH1 φ15 mm

Sample holder

Sample

Sample clip

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 106 107

Sin comentarios

Auto Page MA-200 Manual de instrucciones Pagina 39